Crown Audio CTs-600 - Two-Channel Power Amplifier with PIP

Category Musical Instruments & Gear Pro Audio Equipment Amplifiers

Current price $66.00

Listing type Chinese

Location New Fairfield, Connecticut 06812 US

Quantity sold 1

Quantity available 1

Bids 2

Seller brainslag (248)

Seller rating 100% positive feedback

Type Power Amplifier

Brand Crown

Model CTs 600

MPN GCTS600

Number Of Channels 2

Form Factor Rack-Mountable

Links Please see manufacturer's website

See it on eBay →

GOOD CONDITION, A FEW SCUFFS. LOW HOURS IN A CONFERENCE ROOM NOT USED IN STUDIOS OR FOR LIVE SOUND. SHIPPING TO CONUS ONLY PLEASE
OVERVIEW
_THE CROWN CTS-600 IS A 2-CHANNEL POWER AMPLIFIER HOUSED IN A 2-SPACE RACKMOUNT FRAME, OFFERING POWER LEVELS AND FEATURES MEANT TO SERVE FIXED INSTALLATION SOUND APPLICATIONS. THIS AMPLIFIER IS NOTABLE FOR A COMPLETELY INDEPENDENT ARRAY OF SWITCHES AND INDICATORS FOR EACH CHANNEL, INCLUDING HIGH AND LOW IMPEDANCE OPERATION, INPUT SENSITIVITY, HIGH PASS FILTERS, AND AN ADVANCED LEVEL OF WELL DESIGNED OVERLOAD PROTECTION CIRCUITRY. THIS UNIT INCLUDES A PIP-LITE MODULE FOR NETWORKED CONTROLLING VIA EITHER HIQNET AND SYSTEM ARCHITECT OR TCP/IQ AND IQWIC._
HIGH-POWER, 2-CHANNEL, 2U RACKMOUNT AMPLIFIER FOR INSTALLED SOUND APPLICATIONS
SWITCHING POWER SUPPLY LOWERS OVERALL AMPLIFIER WEIGHT
DIRECT 70V/100V/140V/200V CONSTANT-VOLTAGE OR 2/4/8 OHM LOW-IMPEDANCE OPERATION
INDEPENDENTLY SELECTABLE INPUT SENSITIVITY SWITCHING PER CHANNEL
REAR PANEL PROGRAMMABLE INPUT PROCESSOR(PIP2) CONNECTOR ACCEPTS ACCESSORY EXPANSION MODULES FOR SPECIFIC CUSTOM INSTALLATION REQUIREMENTS
THERMAL LEVEL CONTROL(TLC) CIRCUITRY PROTECTS AMPLIFIER FROM OVERHEATING; ENGAGES INPUT COMPRESSOR, DYNAMICALLY REDUCING INPUT GAIN WHEN INDIVIDUAL CHANNELS OVERHEAT
JUNCTION TEMPERATURE SIMULATION(JTS) QUICK-ACTIVATION CIRCUITRY LIMITS DRIVE LEVEL OF OUTPUT DEVICES TO TOLERABLE RANGE IF EXCESS POWER IS REQUIRED; PROTECTS OUTPUT TRANSISTORS WITHOUT SHUTTING DOWN CHANNEL
CONTINUOUSLY VARIABLE FAN COOLING; VENTING WITH FRONT-TO-REAR FORCED AIRFLOW
REMOVABLE BALANCED TERMINAL BLOCK INPUT CONNECTORS WITH "Y" SWITCH
SWITCHABLE HIGH PASS FILTER PER CHANNEL, ELIMINATES STEP DOWN TRANSFORMER SATURATION IN DISTRIBUTED SYSTEMS
COMPLETE ARRAY OF FRONT PANEL FUNCTION AND WARNING INDICATOR LEDS FOR EACH CHANNEL
COMPLETE ARRAY OF REAR PANEL FUNCTION AND FILTER SWITCHES
POWER ON INDICATOR FLASHES WHEN AC MAINS ARE UNDER OR OVER VOLTAGE
ADVANCED PROTECTION CIRCUITRY COVERS SHORTED OUTPUTS, DC, MISMATCHED LOADS, OVERHEATING, HIGH FREQUENCY OVERLOADS, VOLTAGE FLUCTUATION AND INTERNAL FAULTS.
SPECS
Output Power
2 ohm Dual (Per Channel): 150W
4 ohm Dual (Per Channel): 300W
8 ohm Dual (Per Channel): 300W
16 ohm Dual (Per Channel): 300W
70V Dual (Per Channel): 300W
4 ohm Bridge: 300W
8 ohm Bridge: 600W
16 ohm Bridge: 600W
140V Bridge: 600W
Damping Factor
10 Hz - 100 Hz:>3000
Input Sensitivity
Switchable:
1.4V(8/4 Ohms)
26 dB Gain:
2.46V(4 Ohm Load)
3.47V (8 Ohm Load)
1.4V(70V)
Input Impedance
10 kOhms balanced(nominal), 5 kOhms unbalanced(nominal)
Gain
35:1 (31 dB)
Frequency Response
20 Hz - 20 kHz +/-0.25 dB @ 1 Watt
Signal-to-Noise Ratio
105 dB A-Weighted, below rated power(20 Hz - 20 kHz)
Total Harmonic Distortion (THD)
< 0.1%, at full rated power (20 Hz - 20 kHz)
Input Connections
2 x Balanced 3-Pin Terminal Block Connectors(one per channel)
Output Connectors
1 x 4-Pole Terminal Strip(Ch 1, Ch 2)
Controls Front Panel
1 x Power Switch
Controls (Rear)
1 x Reset Switch
1 x Rotary Channel Level Control(per channel)
1 x 2-Position Operation Mode Switch
1 x Highpass Filter Switch(per channel)
1 x "Y" Input Switch
1 x Interior 3-Position Input Sensitivity Switch(per channel)
Indicators
Front Panel:
1 x Yellow LED Bridge Mode Indicator
1 x Green LED Ready Indicator
3 x Green LED Signal Indicators(per channel)
1 x Red LED Clip Indicator(per channel)
1 x Red LED Thermal Indicator(per channel)
1 x Red LED Fault Indicator
1 x Yellow LED Data Indicator(per channel)
1 x Blue LED Power Indicator
Back Panel: No Indicators on Back Panel
Cooling
Continuously Variable Speed Fans
Ventilation Grille(Front),Cooling Vents(Back)
Front-to-Rear forced airflow
Power Consumption
24 Watts (120 VAC Mains)
Dimensions (WxHxD)
19 x 3.5 x 14.25" (483 x 89 x 362mm)
Weight
22.8 lb (10.3 kg)
Specialties
Variable Speed Fan Cooling
Thermal Level Control
JTS Limiting Circuitry

Also popular in the category Musical Instruments & Gear → Pro Audio Equipment → Amplifiers