Hayward/AquaRite Main PCB - GLX-PCB-RITE G1-011056-1, 015005-40 E 0112 44861

Category Specialty Services Restoration & Repair Electronics

Current price $119.00

Listing type Fixed Price Item

Location West Palm Beach, Florida 33417 US

Quantity sold 0

Quantity available 8

Bids 0

Seller boardbusters (1470)

Seller rating 100% positive feedback

MPN G1-011056-1, 015005-40 E 0112 44861, 090003-158-01 0112

See it on eBay →

WE'VE BEEN IN THE APPLIANCE REPAIR BUSINESS FOR JUST UNDER 20 YEARS. WE STARTED IN THE 90'S BUT AS TIME WENT ON, WE NOTICED THAT APPLIANCES ARE EQUIPPED WITH MANY MORE COMPUTER COMPONENTS THAN IN THE PAST. IN FACT, MANY TECHNICIANS HAVE COMPLETELY GOTTEN OUT OF THE BUSINESS DUE TO THAT! BUT WE ADAPTED AND BEGAN DOING THOSE REPAIRS AS WELL AND OVER TIME, WE ADDED THAT SKILL SET TO OUR SERVICES. IF YOU'RE IN THE PALM BEACH AREA, WE ARE AVAILABLE TO COME TO YOUR HOME TO REPAIR YOUR APPLIANCE AND IF NEED BE, TAKE THE BAD CIRCUIT BOARD WITH US FOR REPAIR.
BELOW YOU'LL FIND AN EXTENSIVE LIST OF BOARDS WE REPAIR. OUR GOAL IS TO EARN YOUR BUSINESS THROUGH CHEAP PRICING, DECENT TURNAROUND TIME AND OVERALL GOOD COMMUNICATION. PLEASE SEND US AN EMAIL WITH THE PICTURE OF THE BOARD, MODEL NUMBER AND ISSUE YOU'RE HAVING AND WE'LL TELL YOU IF IT CAN BE REPAIRED. I CAN TELL YOU THAT WE ARE CHEAPER THAN THE COMPETITION BECAUSE WE DON'T HAVE A LOT OF OVERHEAD. I CAN ALSO TELL YOU THAT WE REPLACE THE BAD PARTS, TEST ALL AND ADDITIONALLY REPLACE MORE COMMON PARTS THAT TEND TO GO BAD, EVEN IF THEY'RE STILL O.K. OUR TURN AROUND TIME IS 1 DAY, UNLESS WE NEED TO ORDER AN ODD RELAY OR EEPROM CHIP. IF YOU NEED IT DONE FASTER AND WE HAVE EVERYTHING WE NEED, WE'LL PUT IT IN FRONT OF THE REST OF THEM. JUST MAKE NOTE OF THAT ON THE PAYPAL RECEIPT. THE BOARDS ARE CHECKED THOROUGHLY. THE BOARDS COME WITH A 1 YEAR WARRANTY. YOU PAY SHIPPING ONLY, WE COVER PARTS. SO IF YOU HAVE AN UNDERLYING PROBLEM THAT IS THE CAUSE OF THE BOARD REPEATEDLY GOING BAD, WE'LL FIX THE BOARD FOR UP TO 1 YEAR OF PAYMENT DATE, IF NEEDED. EMAIL WITH QUESTIONS AND THANK YOU FOR YOUR BUSINESS!
PLEASE PRINT OUT THE PAYPAL RECEIPT AND INCLUDE IT WITH YOUR BOARD ALONG WITH THE UNDERLYING ISSUE. WE MAY NEED TO CONTACT YOU AT ONE POINT SO PLEASE INCLUDE A CELL NUMBER IN WHICH WE CAN EITHER TEXT OR CALL. WE ALSO LIKE TO TELL OUR CUSTOMERS WHEN THEIR BOARD ARRIVES AND WHAT THE STATUS IS. AGAIN, DUE TO THE VARIETY OF PARTS NEEDED ON SOME BOARDS, WE DON'T ALWAYS HAVE THE PARTS AND NEED TO SPECIAL ORDER. THE MORE BOARDS WE GET THOUGH, THE MORE WE ORDER AND THE MORE WE HAVE...
Please send broken circuit boards to:
192 SOMERSET J
WEST PALM BEACH, FL 33417
PLEASE MAKE SURE THAT THE BOARD IS THE SAME IN THE PICTURE. LOOK AT THE SIDE WITH THE RELAYS, NOT JUST THE FACE PLATE. THE BOARD NEEDS TO BE THE SAME IN ORDER FOR OUR EQUIPMENT TO ANALYZE IT.
FOR BOARDS THAT ARE ENCAPSULATED IN A SHELL, PLEASE REMOVE THE SHELL BEFORE MAILING. IT MAKES IT LIGHTER TO SHIP AND EASIER ON US SINCE WE HAVE TO SPEND TIME FIGURING OUT HOW TO REMOVE THEM WITHOUT HURTING THEM. FOR US, IT TAKES TIME DUE TO THE NUMBER OF STUFF WE GET IN SO PLEASE REMOVE IT.
Thank you for your business!
Should there be an issue that is not repairable, for example the MAIN MICROCHIP which has proprietary information on it, we will return your board as well as a refund minus shipping costs and a small fee for our time to check the board out. That small fee is $10. The remainder will be refunded.
*Note We have the tools necessary to thoroughly check all parts on the board, including the main microprocessors and you will know whether or not the board is good and can be repaired or if it's not repairable soon after receiving it.
For any boards in METAL or HEAVY casings, please remove before mailing. If not removed, an additional charge will be invoiced based on the total additional weight of the board. Thank you!
Using the "self clean" mode WILL void your warranty. This option should not be used on any oven, much less an oven with a board that was worked on. It's dangerous and can damage the board.
We will not accept electronic part returns simply because it did not solve the problem you were having with your unit. There are no exceptions. No part can be returned without a valid return authorization number. Should you have any further concerns regarding this warranty, feel free to email us. Too many people abuse the system by purchasing our parts simply to "test" whether or not it's the broken part in their appliance.
Also, please be aware that you WILL BE CHARGED a 20% fee if you make an error and purchase the repair thinking it is a physical board we're selling. Ebay dings us every time that happens and our ratings get knocked down and we can't sell as much, and are therefore forced to open a separate account. Ridiculous, I know! Trust me when I tell you that I've had my words with ebay in regards to this but we cannot continue eating it for folks who are too trigger happy and make purchases before reading the entire ad. So please, do not yell at me, do not send threatening messages, do not leave bad feedback, there is NOTHING I can do about it. And to make matters worse, ebay is UNWILLING to work with us on this so we're stuck.
This comes with a 1 year warranty. That means that if the board should break within a year, we'll fix it at no cost. You pay shipping only back to you. We do not offer a refund because the board can break for any number of reasons after it's been repaired the first time but what we will offer you is a repair.
For those of you who are not sure of whether or not to work with us because we have too little feedback, there is a reason for that. We actually have almost 100% rating but due to the customers accidentally purchasing "board repairs" thinking they were buying the actual board as well as our slow shipping times (we have to wait until we get the board in order to ship it back, not in our control), every month we get dinged a little bit more by ebay. We know it's not fair, we know they will eventually destroy your seller account because of this but they are not willing to help out or change the format in any way to facilitate us or others who sell services on ebay in anyway. If you would like to see our feedback, we are the same as "boardbusterzz" and "appliancesolutionz". We have quite a bit there to check out. Thanks for considering us!
IF YOU'RE NOT SURE WHETHER YOU NEED THIS PART OR NOT, DO NOT ORDER!!!! WE CANNOT TAKE RETURNS ON ELECTRONIC PARTS. WE HAVE TOO MANY PEOPLE MAKING MISTAKES, ORDERING THE WRONG PART, USING OUR PARTS TO TEST THEIR MACHINES, SWAPPING BAD FOR GOOD, OR ANY NUMBER OF RIDICULOUS ACTIONS. WE WILL NOT PUT UP WITH THIS NONSENSE AND WE WILL BE FORCED TO REPORT YOU AND LEAVE A BAD RATING. BE RESPONSIBLE ENOUGH TO DEAL WITH YOUR ORDER IF IT'S NOT THE RIGHT ORDER. YOU CAN SELL IT IF YOU WANT, YOU CAN KEEP IT AS A REPLACEMENT PART, YOU CAN RUN IT OVER IN YOUR CAR IF YOU'D LIKE BUT PLEASE DO NOT BURDEN US WITH YOUR MISTAKES. IT GETS EXTREMELY TIRESOME. THANKS FOR UNDERSTANDING!!
If you get the board back but are still experiencing problems, PLEASE do not go to ebay and ask for a refund! We require a discussion as we might be able to solve it over the phone. There are many instances where a board has to be programmed after it's taken out, and if that's the case, we need to explain how to do so. Or, should there be something we missed, we will need to see the board a 2nd time. If you go to ebay, there are always additional issues, problems, etc. If you want to know what, then ask and we'll explain. In the end, if we cannot repair the board for whatever reason, simply tell us and we'll refund your money less shipping. THANK YOU FOR UNDERSTANDING!!!
Control board repair. Circuit board repair.

Also popular in the category Specialty Services → Restoration & Repair → Electronics