MEADE LX200 GPS 10" Telescope, loaded, shipping box, tripod, Micro Focuser

Category Cameras & Photo Binoculars & Telescopes Telescopes

Current price $2,399.00

Listing type Chinese

Location Fort Lauderdale, Florida 333** US

Quantity sold 0

Quantity available 1

Bids 0

Seller rbartguy (1454)

Seller rating 100% positive feedback

Model LX200 10" GPS

Aperture 2500mm

Type Catadioptric

Features Lens Cover, Motorized, Mounted, Quick Release, Slow Motion Control

Mount Type Double Fork

Brand Meade

See it on eBay →

MEADE LX 200 10" GPS UHTC coated lens Maksutov-Cassegrain Telescope
Fantastic piece of equipment!!
Pre-Owned. Looks near new. No scratches or flaws to the finish. A few of the screws are slightly tarnished and there is one small "water mark" on the inside of the top lens cover glass - too small to effect imaging.
Mirrors, Motors, locks, battery compartments (2), tripod, etc, are all in great condition.
The Autostar II cycles through the many menus, red light works, key lights work, LCD is clean and easy to read, has a huge number of features and selections. Included a soft field case for the controller.
Includes:
Meade LX200 10" GPS UHTC coated lens
115V ac Power supply
GPS
* 8X50 Optical Viewfinder with Crosshair with adjustable mount
* Autostar II Hand Controller and cord w/ field soft case w/ plexi window
Meade fully padded shipping box
Zero-Shift Electronic Microfocuser and 1 1/2" lens adapter
Meade Tripod
Meade 4mm Lens
Meade Diagonal
Front lens cover
Back lens cover
Digital Eyepiece CMOS USB Electronic Camera
Extra Attachment for DSLR camera
** Will be shipped in two boxes. The Meade Telescope box alone is 70 lbs - yes- its heavy!
MEADE 10" LX200 GPS COMPUTERIZED TELESCOPES take previous telescope technology to a level heretofore unimagined.
Meade UHTC ULTRA HIGH TRANSMISSION COATINGS are an important feature to optimize the performance of your telescope. Technologies developed at the MEADE coatings facility have optimized the visual and photographic performance of Meade telescopes. The UHTC COATINGS, upon all 4 optical surfaces, result in a 20% decrease in light loss and a dramatic enhancement in detail, particularly of tiny facets and deep space objects.
MEADE LX-200 GPS TELESCOPES fork mounts are the strongest, most rigid mountings ever made available for telescopes of these apertures. DC-servo-motor-controlled (12v DC) worm gear drives with almost two hundred available drive speeds, combined with the MEADE SMART DRIVE on both telescope axes, permit observatory-level precision in tracking, guiding, and slewing.
PRECISION GPS ALIGNMENT: Telescope alignment is accomplished automatically using signals from the GPS satellite system that enables extremely precise communication to the telescope of the observer's latitude and longitude, as well as local time. Integrated true-level and North electronic sensors in combination with a 16-CHANNEL GPS RECEIVER located in the left-hand fork arm result in accurate TELESCOPE alignment to the sky at the touch of a button: Just press the ENTER button on the AUTOSTAR II HAND CONTROLLER and watch as the telescope measures level, points North, and slews at 8°/sec. to its first alignment star. Magnetic declination compensation designed into the telescope software automatically engages during the alignment process.
SMART MOUNT: Improves the pointing accuracy of your MEADE 10" LX200-GPS MAKSUTOV-CASSEGRAIN TELESCOPE's "Go To" system. Despite careful efforts to calibrate and then align telescopes, they may fail to precisely center objects. SMART MOUNT allows your telescope to learn about, and then correct for any systematic pointing errors, regardless of the cause.
AUTOSTAR II CONTROL SYSTEM: Completely redesigned and updated for the LX200GPS-SMT SERIES, the MEADE AUTOSTAR II CONTROL SYSTEM includes the widest array of telescope capabilities ever offered in a commercial telescope.
AUTOSTAR SUITE SOFTWARE: which includes selecting objects from the planetarium display and automatically slewing to those objects, remote control via internet, the LUNAR PLANETARY IMAGER (LPI), the creation of custom tours, talking telescope software, and the ability to control all autostar functions using your PC.
BUILT-IN 145,000-OBJECT LIBRARY INCLUDED AS STANDARD EQUIPMENT: Enter into the Autostar II hand box any of the 145,000 celestial objects stored in the LX 200 GPS SMT onboard database, press GO TO, and the telescope automatically slews (moves) to the object at 8°/sec., centering it precisely in the main telescope field. Additionally, the display reads out for each selected object its magnitude, size, object-type, visual quality rating, RA and Dec. Or, let the TELESCOPE take you on an automatic guided tour of TONIGHT'S BEST.
ADDITIONAL AUTOSTAR II FUNCTIONS: Dozens of additional handbox functions, all easily and immediately accessible, make Autostar II the most powerful electronic tool ever developed for the serious amateur. A partial listing of fewer than half of these functions includes: GO TO capability to any input RA and Dec. coordinates; a 200-object user-defined library; event menus displaying the times and/or dates of Sunrise/Sunset, Moonrise/Moonset, Moon phases, meteor showers, minimum of Algol, equinoxes and solstices; custom-guided tours defined by the user; standard tours including Tonight's Best; 24-hour timer with beeper; alarm function with beeper sounds at selected times; 16-level DISPLAY contrast adjust; red-LED utility light; battery alarm for low-battery warning; 7 alignment modes; sidereal, lunar, or any of 2000 custom tracking rates; factory-trained Smart Drive periodic error correction on both telescope axes with field-training capability.
PRIMARY MIRROR LOCK: This revolutionary new rear-cell system is designed for the advanced visual observer, astrophotographer, and CCD imager. Turn a knob located just above the manual coarse-focus knob, and lock the telescope's primary mirror rigidly in place. Used in conjunction with the ZERO IMAGE-SHIFT MICROFOCUSER the progressive-tension primary mirror lock completely cancels any residual image shift while focusing during visual, photographic, or CCD IMAGING applications.
SOFTWARE DOWNLOADS AND SATELLITE TRACKING: The software included in MEADE LX-200GPS SMT TELESCOPES Is under continuous factory review; updates to this software are published at regular intervals. Importantly, the latest software version, as well as custom and updated guided tours, comet and asteroid positions, may be downloaded in minutes from the Meade website. Additionally, current Earth satellite orbital data (including the International Space Station, Space Shuttle, etc.) may be downloaded; the telescope then automatically acquires and tracks the satellite at the correct tracking rate. Included as standard equipment on all LX-200GPS-SMT SCHMIDT-CASSEGRAIN MODELS, the Meade ZERO IMAGE-SHIFT MICROFOCUSER operates at 4 speeds from extremely slow to fast; the entire microfocusing operation is actuated through the Autostar II handbox and powered from the telescope's control panel. Coarse manual focusing is effected through the TELESCOPE's manual focus knob.
HIGH-PRECISION POINTING (HP) CAPABILITY: MEADE LX200-GPS SMT MODELS permit the most accurate pointing capability ever offered in a COMMERCIAL TELESCOPE. Now you can command the TELESCOPE to GO TO an object located on the opposite side of the sky (for example, a distance of 120 degrees in sky-angle) and, in conjunction with the telescope's unique SYNC command, the LX200 - GPS SMT locates and centers the desired object to within a precision of about one arc-minute. HP capability is accessible in either the altazimuth or equatorial orientations. For casual observing such high precision in pointing is not generally required, since even without HP-mode pointing, the LX-200 GPS SMT is capable of locating objects to within a pointing precision of about 2 arc minutes or better.
CONTROL PANEL FUNCTIONS: Use the TELESCOPE'S CONTROL PANEL for direct connection of CCD imagers and autoguiders; plug in an illuminated reticle eyepiece for photo-guiding, adjusting reticle brightness from the Autostar II handbox; or power the standard-equipment Zero Image-Shift Microfocuser. Two RS-232 serial interface connectors are provided.
The TELESCOPE'S FLASH MEMORY may be upgraded through one of the RS-232 ports with new software or data as they become available on the Meade website.
ALTAZIMUTH OPERATION: For all visual observing applications, for lunar and planetary photography, and for many CCD imaging applications, MEADE 10" LX200GPS MAKSUTOV-CASSEGRAIN TELESCOPES may be set up in the altazimuth mode - just attach the telescope's drive base directly to the tripod, use the GPS alignment procedure, and the telescope's computer actuates 2-axis tracking that keeps objects precisely centered in the field, even at high powers, during the entire observing session. For long-exposure astrophotography (longer than about 5 minutes) altazimuth-induced field rotation requires an equatorial wedge or the #1220 Field De-rotater, either of which may be purchased separately.
FIELD OPERATION: MEADE LX200 TELESCOPES operate for about 20 hours from eight C-cells neatly stored inside the fork arms. Alternately, telescope powering may be effected from an automobile cigarette lighter plug (using the optional #607 Power Cord) or from a standard home outlet (using the optional #547 AC Adapter).
NOTE: One of the tripod legs locking device is slightly damaged but locks properly.
Pre owned. Tested. Sold as-is with no warranty and no returns

Also popular in the category Cameras & Photo → Binoculars & Telescopes → Telescopes